How To Solder

• Clean the parts to be joined.
• Clean soldering iron tip and “tin” all faces of tip with a coating of solder.
• Heat parts (not solder) to be joined.
• Apply flux-core solder to heated parts,not the soldering tip, and heat it till solder melts and flows freely.

Caution

• When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a short while and a smoke never comes out again.
• Use soldering stand and other aids to avoid burnt fingers.
• Don’t pull the soldering iron tip outward and use it, it will shorten the heating element life
• Arter finish the long life tip face.
• Don’t tile the long life tip face.
• Don’t apply too much solder unnecessarily.
• Check up voltage fairly before using the soldering iron.
• File off any dirt, rust or paint on the part you wish to solder.
• The head of the”Soldering iron mustn’t soak hydrochloric acid to avoid corrosion and affect using.
• Avoid knocking the electric soldering iron, regardless it is cold or hot to keep its heating element
  from damage.
• Apply resin-based solder tO the part and melt it with the soldering iron,wait for the s.older to cool
  and harden before moving the soldered part.

The post 60W Soldering Iron appeared first on Kumarasinghe Radio Institute (KRI).

How To Solder

• Clean the parts to be joined.
• Clean soldering iron tip and “tin” all faces of tip with a coating of solder.
• Heat parts (not solder) to be joined.
• Apply flux-core solder to heated parts,not the soldering tip, and heat it till solder melts and flows freely.

Caution

• When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a short while and a smoke never comes out again.
• Use soldering stand and other aids to avoid burnt fingers.
• Don’t pull the soldering iron tip outward and use it, it will shorten the heating element life
• Arter finish the long life tip face.
• Don’t tile the long life tip face.
• Don’t apply too much solder unnecessarily.
• Check up voltage fairly before using the soldering iron.
• File off any dirt, rust or paint on the part you wish to solder.
• The head of the”Soldering iron mustn’t soak hydrochloric acid to avoid corrosion and affect using.
• Avoid knocking the electric soldering iron, regardless it is cold or hot to keep its heating element
  from damage.
• Apply resin-based solder tO the part and melt it with the soldering iron,wait for the s.older to cool
  and harden before moving the soldered part.

The post 100 W Soldering Iron High Performance appeared first on Kumarasinghe Radio Institute (KRI).

How To Solder

• Clean the parts to be joined.
• Clean soldering iron tip and “tin” all faces of tip with a coating of solder.
• Heat parts (not solder) to be joined.
• Apply flux-core solder to heated parts,not the soldering tip, and heat it till solder melts and flows freely.

Caution

• When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a short while and a smoke never comes out again.
• Use soldering stand and other aids to avoid burnt fingers.
• Don’t pull the soldering iron tip outward and use it, it will shorten the heating element life
• Arter finish the long life tip face.
• Don’t tile the long life tip face.
• Don’t apply too much solder unnecessarily.
• Check up voltage fairly before using the soldering iron.
• File off any dirt, rust or paint on the part you wish to solder.
• The head of the”Soldering iron mustn’t soak hydrochloric acid to avoid corrosion and affect using.
• Avoid knocking the electric soldering iron, regardless it is cold or hot to keep its heating element
  from damage.
• Apply resin-based solder tO the part and melt it with the soldering iron,wait for the s.older to cool
  and harden before moving the soldered part.

The post 40W Soldering Iron appeared first on Kumarasinghe Radio Institute (KRI).

How To Solder

• Clean the parts to be joined.
• Clean soldering iron tip and “tin” all faces of tip with a coating of solder.
• Heat parts (not solder) to be joined.
• Apply flux-core solder to heated parts,not the soldering tip, and heat it till solder melts and flows freely.

Caution

• When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a short while and a smoke never comes out again.
• Use soldering stand and other aids to avoid burnt fingers.
• Don’t pull the soldering iron tip outward and use it, it will shorten the heating element life
• Arter finish the long life tip face.
• Don’t tile the long life tip face.
• Don’t apply too much solder unnecessarily.
• Check up voltage fairly before using the soldering iron.
• File off any dirt, rust or paint on the part you wish to solder.
• The head of the”Soldering iron mustn’t soak hydrochloric acid to avoid corrosion and affect using.
• Avoid knocking the electric soldering iron, regardless it is cold or hot to keep its heating element
  from damage.
• Apply resin-based solder tO the part and melt it with the soldering iron,wait for the s.older to cool
  and harden before moving the soldered part.

The post 60 W Soldering Iron Heater (Winstar) appeared first on Kumarasinghe Radio Institute (KRI).

How To Solder

• Clean the parts to be joined.
• Clean soldering iron tip and “tin” all faces of tip with a coating of solder.
• Heat parts (not solder) to be joined.
• Apply flux-core solder to heated parts,not the soldering tip, and heat it till solder melts and flows freely.

Caution

• When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a short while and a smoke never comes out again.
• Use soldering stand and other aids to avoid burnt fingers.
• Don’t pull the soldering iron tip outward and use it, it will shorten the heating element life
• Arter finish the long life tip face.
• Don’t tile the long life tip face.
• Don’t apply too much solder unnecessarily.
• Check up voltage fairly before using the soldering iron.
• File off any dirt, rust or paint on the part you wish to solder.
• The head of the”Soldering iron mustn’t soak hydrochloric acid to avoid corrosion and affect using.
• Avoid knocking the electric soldering iron, regardless it is cold or hot to keep its heating element
  from damage.
• Apply resin-based solder tO the part and melt it with the soldering iron,wait for the s.older to cool
  and harden before moving the soldered part.

The post 50W Soldering Iron appeared first on Kumarasinghe Radio Institute (KRI).

How To Solder

• Clean the parts to be joined.
• Clean soldering iron tip and “tin” all faces of tip with a coating of solder.
• Heat parts (not solder) to be joined.
• Apply flux-core solder to heated parts,not the soldering tip, and heat it till solder melts and flows freely.

Caution

• When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a short while and a smoke never comes out again.
• Use soldering stand and other aids to avoid burnt fingers.
• Don’t pull the soldering iron tip outward and use it, it will shorten the heating element life
• Arter finish the long life tip face.
• Don’t tile the long life tip face.
• Don’t apply too much solder unnecessarily.
• Check up voltage fairly before using the soldering iron.
• File off any dirt, rust or paint on the part you wish to solder.
• The head of the”Soldering iron mustn’t soak hydrochloric acid to avoid corrosion and affect using.
• Avoid knocking the electric soldering iron, regardless it is cold or hot to keep its heating element
  from damage.
• Apply resin-based solder tO the part and melt it with the soldering iron,wait for the s.older to cool
  and harden before moving the soldered part.

The post 30W Soldering Iron appeared first on Kumarasinghe Radio Institute (KRI).

How To Solder

• Clean the parts to be joined.
• Clean soldering iron tip and “tin” all faces of tip with a coating of solder.
• Heat parts (not solder) to be joined.
• Apply flux-core solder to heated parts,not the soldering tip, and heat it till solder melts and flows freely.

Caution

• When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a short while and a smoke never comes out again.
• Use soldering stand and other aids to avoid burnt fingers.
• Don’t pull the soldering iron tip outward and use it, it will shorten the heating element life
• Arter finish the long life tip face.
• Don’t tile the long life tip face.
• Don’t apply too much solder unnecessarily.
• Check up voltage fairly before using the soldering iron.
• File off any dirt, rust or paint on the part you wish to solder.
• The head of the”Soldering iron mustn’t soak hydrochloric acid to avoid corrosion and affect using.
• Avoid knocking the electric soldering iron, regardless it is cold or hot to keep its heating element
  from damage.
• Apply resin-based solder tO the part and melt it with the soldering iron,wait for the s.older to cool
  and harden before moving the soldered part.

The post 35W Soldering Iron appeared first on Kumarasinghe Radio Institute (KRI).