Operation Instruction 

• Insert a glue stick into the glue gun rom the back. (Insert a 0 7-07.5mm glue stick available in Sri Lanka)
• Plug the glue glue gun in the power or switch on. 
• Preheat for 3-5 minutes to melt the glue stick. 
• Pull the trigger and squeeze to pour the melt adhesive out.
• WARNING! Please DO NOT pull out the left stick at the end of use, it may damage glue gun severely. You can use the left stick directly next time.
• If you are not using the glue gun continuously for 15 minutes, please turn off the power.

Warning 

• This is a high-temperature glue gun, any use of poorly manufactured glue sticks may make melt adhesive inverse flows, then damage the gun. 
• The temperature of hose and melt adhesive is high when the glue gun is on, any direct body contact is prohibited, and do not use it at any flammable materials. 
• Please do not lift the glue gun high, and do not lift the glue gun heads up. 
• Pleas power off if no adhesive flows within 15 minutes, avoiding any inverse adhesive flow damages the gun. 
• It is normal to see some smoke at the first use, it will disappear after 30 minutes. 
• Always keep the rear slide block clean to ensure any insert of stick into the heating hose is smooth. 
• Please place the gun at dry and ventilated place. DO NOT store it at a  high humidity or wet environment.
• Don’t disassemble the melt glue gun in any case.
• Don’t pull out of the remaining glue sticks from hot glue gun after use. insert a new glue stick to push the remaining part of the old glue sticks.
• If you accidentally get hot glue on your skin, run the effected skin under cold water to cool the Brin and harden the glue to peel it off.
• Make sure the glue gun has cooled sufficiently before putting it away. 

Application 

• Adhere or joint two work pieces when repair furniture, fix electrical wire, install floors, fix toy and model, etc. 
• Repair a leak or crack as waterproof material in bucket, rain gutter, etc. 
• Seal cartons or other package. 
• Applicable for different surfaces, such as wood, plastics, foam, fabrics, paper, cardboard, ceramics, etc.

The post Small Hot Glue Gun with Free Glue Sticks (20 Watts, Black) S3 White appeared first on Kumarasinghe Radio Institute (KRI).

Operation Instruction 

• Insert a glue stick into the glue gun rom the back. (Insert a 0 7-07.5mm glue stick available in Sri Lanka)
• Plug the glue glue gun in the power or switch on. 
• Preheat for 3-5 minutes to melt the glue stick. 
• Pull the trigger and squeeze to pour the melt adhesive out.
• WARNING! Please DO NOT pull out the left stick at the end of use, it may damage glue gun severely. You can use the left stick directly next time.
• If you are not using the glue gun continuously for 15 minutes, please turn off the power.

Warning 

• This is a high-temperature glue gun, any use of poorly manufactured glue sticks may make melt adhesive inverse flows, then damage the gun. 
• The temperature of hose and melt adhesive is high when the glue gun is on, any direct body contact is prohibited, and do not use it at any flammable materials. 
• Please do not lift the glue gun high, and do not lift the glue gun heads up. 
• Pleas power off if no adhesive flows within 15 minutes, avoiding any inverse adhesive flow damages the gun. 
• It is normal to see some smoke at the first use, it will disappear after 30 minutes. 
• Always keep the rear slide block clean to ensure any insert of stick into the heating hose is smooth. 
• Please place the gun at dry and ventilated place. DO NOT store it at a  high humidity or wet environment.
• Don’t disassemble the melt glue gun in any case.
• Don’t pull out of the remaining glue sticks from hot glue gun after use. insert a new glue stick to push the remaining part of the old glue sticks.
• If you accidentally get hot glue on your skin, run the effected skin under cold water to cool the Brin and harden the glue to peel it off.
• Make sure the glue gun has cooled sufficiently before putting it away. 

Application 

• Adhere or joint two work pieces when repair furniture, fix electrical wire, install floors, fix toy and model, etc. 
• Repair a leak or crack as waterproof material in bucket, rain gutter, etc. 
• Seal cartons or other package. 
• Applicable for different surfaces, such as wood, plastics, foam, fabrics, paper, cardboard, ceramics, etc.

The post Small Hot Glue Gun with Free Glue Sticks (20 Watts, Black) S2 White appeared first on Kumarasinghe Radio Institute (KRI).

Operation Instruction 

• Insert a glue stick into the glue gun rom the back. (Insert a 0 7-07.5mm glue stick available in Sri Lanka)
• Plug the glue glue gun in the power or switch on. 
• Preheat for 3-5 minutes to melt the glue stick. 
• Pull the trigger and squeeze to pour the melt adhesive out.
• WARNING! Please DO NOT pull out the left stick at the end of use, it may damage glue gun severely. You can use the left stick directly next time.
• If you are not using the glue gun continuously for 15 minutes, please turn off the power.

Warning 

• This is a high-temperature glue gun, any use of poorly manufactured glue sticks may make melt adhesive inverse flows, then damage the gun. 
• The temperature of hose and melt adhesive is high when the glue gun is on, any direct body contact is prohibited, and do not use it at any flammable materials. 
• Please do not lift the glue gun high, and do not lift the glue gun heads up. 
• Pleas power off if no adhesive flows within 15 minutes, avoiding any inverse adhesive flow damages the gun. 
• It is normal to see some smoke at the first use, it will disappear after 30 minutes. 
• Always keep the rear slide block clean to ensure any insert of stick into the heating hose is smooth. 
• Please place the gun at dry and ventilated place. DO NOT store it at a  high humidity or wet environment.
• Don’t disassemble the melt glue gun in any case.
• Don’t pull out of the remaining glue sticks from hot glue gun after use. insert a new glue stick to push the remaining part of the old glue sticks.
• If you accidentally get hot glue on your skin, run the effected skin under cold water to cool the Brin and harden the glue to peel it off.
• Make sure the glue gun has cooled sufficiently before putting it away. 

Application 

• Adhere or joint two work pieces when repair furniture, fix electrical wire, install floors, fix toy and model, etc. 
• Repair a leak or crack as waterproof material in bucket, rain gutter, etc. 
• Seal cartons or other package. 
• Applicable for different surfaces, such as wood, plastics, foam, fabrics, paper, cardboard, ceramics, etc.

The post Large Hot Glue Gun With 12 Free Glue Sticks (60 Watts, Black) White appeared first on Kumarasinghe Radio Institute (KRI).

Operation Instruction 

• Insert a glue stick into the glue gun rom the back. (Insert a 0 7-07.5mm glue stick available in Sri Lanka)
• Plug the glue glue gun in the power or switch on. 
• Preheat for 3-5 minutes to melt the glue stick. 
• Pull the trigger and squeeze to pour the melt adhesive out.
• WARNING! Please DO NOT pull out the left stick at the end of use, it may damage glue gun severely. You can use the left stick directly next time.
• If you are not using the glue gun continuously for 15 minutes, please turn off the power.

Warning 

• This is a high-temperature glue gun, any use of poorly manufactured glue sticks may make melt adhesive inverse flows, then damage the gun. 
• The temperature of hose and melt adhesive is high when the glue gun is on, any direct body contact is prohibited, and do not use it at any flammable materials. 
• Please do not lift the glue gun high, and do not lift the glue gun heads up. 
• Pleas power off if no adhesive flows within 15 minutes, avoiding any inverse adhesive flow damages the gun. 
• It is normal to see some smoke at the first use, it will disappear after 30 minutes. 
• Always keep the rear slide block clean to ensure any insert of stick into the heating hose is smooth. 
• Please place the gun at dry and ventilated place. DO NOT store it at a  high humidity or wet environment.
• Don’t disassemble the melt glue gun in any case.
• Don’t pull out of the remaining glue sticks from hot glue gun after use. insert a new glue stick to push the remaining part of the old glue sticks.
• If you accidentally get hot glue on your skin, run the effected skin under cold water to cool the Brin and harden the glue to peel it off.
• Make sure the glue gun has cooled sufficiently before putting it away. 

Application 

• Adhere or joint two work pieces when repair furniture, fix electrical wire, install floors, fix toy and model, etc. 
• Repair a leak or crack as waterproof material in bucket, rain gutter, etc. 
• Seal cartons or other package. 
• Applicable for different surfaces, such as wood, plastics, foam, fabrics, paper, cardboard, ceramics, etc.

The post Small Hot Glue Gun With 12 Free Glue Sticks (20 Watts, Black) White appeared first on Kumarasinghe Radio Institute (KRI).

• Insert the glue stick into the glue gun rom the back.
• Plug the glue glue gun in the power or switch on. 
• Preheat for 3-5 minutes to melt the glue stick. 
• Pull the trigger and squeeze to pour the melt adhesive out.
• WARNING! Please DO NOT pull out the left stick at the end of use, it may damage glue gun severely. You can use the left stick directly next time.
• If you are not using the glue gun continuously for 15 minutes, please turn off the power.

Warning 

• Don’t pull out of the remaining glue sticks from hot glue gun after use. insert a new glue stick to push the remaining part of the old glue sticks.
• If you accidentally get hot glue on your skin, run the effected skin under cold water to cool the Brin and harden the glue to peel it off.

What are the hot glue sticks sizes available in sri lanka?
Hot glue sticks standard length is 4 inches to 10 inches in length. 

How long does it take hot glue to dry?
Hot glue will dry quickly,  less than a minute, but can take longer depending on how much glue you use.

The post Large Hot glue stick Black, Length 4 and 0.27 diameter – Compatible with most glue guns. appeared first on Kumarasinghe Radio Institute (KRI).

• Insert the glue stick into the glue gun rom the back.
• Plug the glue glue gun in the power or switch on. 
• Preheat for 3-5 minutes to melt the glue stick. 
• Pull the trigger and squeeze to pour the melt adhesive out.
• WARNING! Please DO NOT pull out the left stick at the end of use, it may damage glue gun severely. You can use the left stick directly next time.
• If you are not using the glue gun continuously for 15 minutes, please turn off the power.

Warning 

• Don’t pull out of the remaining glue sticks from hot glue gun after use. insert a new glue stick to push the remaining part of the old glue sticks.
• If you accidentally get hot glue on your skin, run the effected skin under cold water to cool the Brin and harden the glue to peel it off.

What are the hot glue sticks sizes available in sri lanka?
Hot glue sticks standard length is 4 inches to 10 inches in length. 

How long does it take hot glue to dry?
Hot glue will dry quickly,  less than a minute, but can take longer depending on how much glue you use.

The post Large Hot glue stick Clear White, Length 4 and 0.27 diameter – Compatible with most glue guns. appeared first on Kumarasinghe Radio Institute (KRI).

• Insert the glue stick into the glue gun rom the back.
• Plug the glue glue gun in the power or switch on. 
• Preheat for 3-5 minutes to melt the glue stick. 
• Pull the trigger and squeeze to pour the melt adhesive out.
• WARNING! Please DO NOT pull out the left stick at the end of use, it may damage glue gun severely. You can use the left stick directly next time.
• If you are not using the glue gun continuously for 15 minutes, please turn off the power.

Warning 

• Don’t pull out of the remaining glue sticks from hot glue gun after use. insert a new glue stick to push the remaining part of the old glue sticks.
• If you accidentally get hot glue on your skin, run the effected skin under cold water to cool the Brin and harden the glue to peel it off.

What are the hot glue sticks sizes available in sri lanka?
Hot glue sticks standard length is 4 inches to 10 inches in length. 

How long does it take hot glue to dry?
Hot glue will dry quickly,  less than a minute, but can take longer depending on how much glue you use.

The post Small Hot glue stick Clear White, Length 4 and 0.27 diameter – Compatible with most glue guns appeared first on Kumarasinghe Radio Institute (KRI).

Round edges on one side of the cable tie makes it easy to handle. Our cable ties are very flexible making it easy to around a cable jacket. Our locking cable ties are good for indoor and outdoor use. Using the cable tie (zip ties) in direct sunlight is not an issue. Ideal for where your zip ties are exposed to a higher amount of ultra violet rays from the sun. When manufacturing we added carbon stabilizers in the nylon resin to make it UV resistant as well as to greater provide resistance to other elements. There are 3 main materials cable ties are made from nylon tie, rubber cable ties, pvc cable tie. All our cable ties in Sri Lanka comes as 100 pieces able tie packets. Black cable ties and white cable ties are available.

Product ID Cable Tie Sri lanka 12 inches 3.6 x 300mm

The post Cable Tie 12 inches – 3.6 x 300mm (Black & White) appeared first on Kumarasinghe Radio Institute (KRI).

Round edges on one side of the cable tie makes it easy to handle. Our cable ties are very flexible making it easy to around a cable jacket. Our locking cable ties are good for indoor and outdoor use. Using the cable tie (zip ties) in direct sunlight is not an issue. Ideal for where your zip ties are exposed to a higher amount of ultra violet rays from the sun. When manufacturing we added carbon stabilizers in the nylon resin to make it UV resistant as well as to greater provide resistance to other elements. There are 3 main materials cable ties are made from nylon tie, rubber cable ties, pvc cable tie. All our cable ties in Sri Lanka comes as 100 pieces able tie packets. Black cable ties and white cable ties are available.

Product ID Cable Tie Sri lanka 10 inches 3.6 x 250mm

The post Cable Tie 10 inches – 3.6 x 250mm (Black & White) appeared first on Kumarasinghe Radio Institute (KRI).

Round edges on one side of the cable tie makes it easy to handle. Our cable ties are very flexible making it easy to around a cable jacket. Our locking cable ties are good for indoor and outdoor use. Using the cable tie (zip ties) in direct sunlight is not an issue. Ideal for where your zip ties are exposed to a higher amount of ultra violet rays from the sun. When manufacturing we added carbon stabilizers in the nylon resin to make it UV resistant as well as to greater provide resistance to other elements. There are 3 main materials cable ties are made from nylon tie, rubber cable ties, pvc cable tie. All our cable ties in Sri Lanka comes as 100 pieces able tie packets. Black cable ties and white cable ties are available.

Product ID Cable Tie Sri lanka 8 inches 3.6 x 200mm

The post Cable Tie 8 inches – 3.6 x 200mm (Black & White) appeared first on Kumarasinghe Radio Institute (KRI).